1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ 23 /* All Rights Reserved */ 24 25 26 #ifndef _PARMS_H 27 #define _PARMS_H 28 29 /* If running SVR3, #define both ATTSVR3 and ATTSV */ 30 #define ATTSVR3 /* System V Release 3 */ 31 32 /* One of the following four lines should not be commented out. 33 * The other three should be unless you are running a unique hybrid. 34 */ 35 36 #define ATTSV /* System III or System V */ 37 /* #define V7 */ /* Version 7 systems (32V, Berkeley 4BSD, 4.1BSD) */ 38 /* #define BSD4_2 */ /* Berkeley 4.2BSD */ 39 /* #define V8 */ /* Research Eighth Edition */ 40 41 /* Owner of setud files running on behalf of uucp. Needed in case 42 * root runs uucp and euid is not honored by kernel. 43 * GID is needed for some chown() calls. 44 * Also used if guinfo() cannot find the current users ID in the 45 * password file. 46 */ 47 #define UUCPUID (uid_t) 5 /* */ 48 #define UUCPGID (gid_t) 5 /* */ 49 50 /* define ATTSVKILL if your system has a kill(2) that accepts kill(0, pid) 51 * as a test for killability. If ATTSV is defined this will automatically 52 * be defined anyway. 53 */ 54 #define ATTSVKILL /* */ 55 56 /* 57 * the next two lines control high resolution sleeps, called naps. 58 * 59 * most UNIX versions have no nap() system call; they want NONAP defined, 60 * in which case one is provided in the code. this includes all standard 61 * versions of UNIX. 62 * 63 * some sites use a fast timer that reads a number of clock ticks and naps 64 * for that interval; they want NONAP defined, and FASTTIMER defined as 65 * the name of the device, e.g., /dev/ft. 66 * 67 * repeating, NONAP should be disabled *only* if your standard library has a 68 * function called nap. 69 */ 70 71 72 #define NONAP /* nominal case -- no nap() in the standard library */ 73 /* #define FASTTIMER "/dev/ft" */ /* identify the device used for naps */ 74 75 /* 76 * we use ustat to decide whether there's enough space to receive a 77 * file. if you're not ATTSV, you can use a setgid program to read the 78 * number of free blocks and free inodes directly off the disk. if you 79 * choose this course, do not define NOUSTAT; rather, define V7USTAT to 80 * be the name of that program. be sure it accepts 2 args, major and minor 81 * device numbers, and returns two numbers, blocks and inodes, in 82 * "%d %d" format, or you'll never receive another file. 83 */ 84 /* #define V7USTAT "/usr/local/lib/ustat" */ 85 /* #define NOUSTAT */ /* define NOUSTAT if you don't have ustat */ 86 87 /* define GRPCHK if you want to restrict the ability to read */ 88 /* Systems file stuff by way of the DEBUG flags based on a group id range */ 89 /* ex: if (GRPCHK(getgid()) no_secrets(); */ 90 #define GRPMIN (gid_t) 2 /* */ 91 #define GRPMAX (gid_t) 10 /* */ 92 #define GRPCHK(gid) ( gid >= GRPMIN && gid <= GRPMAX ? 1 : 0 ) /* */ 93 /* #define GRPCHK(gid) 1 */ /* Systems info is not protected from DEBUG */ 94 95 /* definitions for the types of networks and dialers that are available */ 96 /* used to depend on STANDALONE, but now done at runtime via Sysfiles */ 97 #define DATAKIT /* define DATAKIT if datakit is available. */ 98 /* #define UNET */ /* define UNET if you have 3com ethernet software */ 99 /* #define TCP */ /* TCP (bsd systems) */ 100 /* #define SYTEK*/ /* for sytek network */ 101 102 #ifdef ATTSVR3 103 #define TLI /* for AT&T Transport Layer Interface networks */ 104 #define TLIS /* for AT&T Transport Layer Interface networks */ 105 /* with streams module "tirdwr" */ 106 #endif /* ATTSVR3 */ 107 108 #define DIAL801 /* 801/212-103 auto dialers */ 109 110 /* define DUMB_DN if your dn driver (801 acu) cannot handle '=' */ 111 /* #define DUMB_DN */ 112 113 /* 114 * Define protocols that are to be linked into uucico: 115 * 116 * The following table shows which protocols and networks work well 117 * together. The g protocol works over noisy links. The e protocol 118 * assumes that the underlying network provides an error free communications 119 * channel that transfers the data in sequence without duplication. The 120 * d protocols makes the same assumptions as the e protocol, but in addition 121 * it does Datakit specific ioctl's. The g protocol is always included in 122 * uucico. To include the other protocols, 1) insure that the symbol from 123 * the Symbol column is defined in this file and 2) include the file from 124 * the File comlumn in the definition of PROTOCOLS in uucp.mk. 125 * 126 * Prot. 127 * Letter Symbol File Applicable Media 128 * 129 * g none - - 130 * e E_PROTOCOL eio.c TCP, UNET, TLI, and DATAKIT. 131 * d D_PROTOCOL dio.c DATAKIT 132 * x X_PROTOCOL xio.c - 133 * 134 * The next six lines conditionally define the protocol symbols for d 135 * and e protocols based on the networks that were chosen above. For the 136 * x protocol you must explicitly define X_PROTOCOL. 137 */ 138 139 #ifdef DATAKIT /* Should include D protocol for Datakit. */ 140 #define D_PROTOCOL 141 #endif /* DATAKIT */ 142 143 #if defined TCP || defined UNET || defined TLI || defined DATAKIT 144 #define E_PROTOCOL /* Include e protocol. */ 145 #endif /* TCP || UNET || TLI || DATAKIT */ 146 147 /* #define X_PROTOCOL */ /* define X_PROTOCOL to use the xio protocol */ 148 #define X_PROTOCOL /* aeh - to check compilation */ 149 150 #define MAXCALLTRIES 2 /* maximum call attempts per Systems file line */ 151 152 /* define DEFAULT_BAUDRATE to be the baud rate you want to use when both */ 153 /* Systems file and Devices file allow Any */ 154 #define DEFAULT_BAUDRATE "9600" /* */ 155 156 /*define permission modes for the device */ 157 #define M_DEVICEMODE (mode_t) 0600 /* manager device mode */ 158 #define S_DEVICEMODE (mode_t) 0600 /* subsidiary device mode */ 159 #define R_DEVICEMODE (mode_t) 0600 /* default mode to restore */ 160 161 /* NO_MODEM_CTRL - define this if you have very old hardware 162 * that does not know how to correctly handle modem control 163 * Some old pdp/11 hardware such as dk, dl 164 * If you define this, and have DH devices for direct lines, 165 * the ports will often hang and be unusable. 166 */ 167 /*#define NO_MODEM_CTRL */ 168 169 170 /* UUSTAT_TBL - this is the maximum number of machines that 171 * status may be needed at any instant. 172 * If you are not concerned with memory for a seldom used program, 173 * make it very large. 174 * This number is also used in uusched for its machine table -- it has 175 * the same properties as the one in uustat. 176 */ 177 178 /* #define UUSTAT_TBL 1000 */ /* big machine with lots of traffic */ 179 #define UUSTAT_TBL 200 180 181 /* define UNAME if uname() should be used to get uucpname 182 * This will be defined automatically if ATTSV is defined 183 */ 184 #define UNAME /* */ 185 186 /* initial wait time after failure before retry */ 187 #define RETRYTIME 300 /* 5 minutes */ 188 /* MAXRETRYTIME is for exponential backoff limit. 189 * NOTE - this should not be 24 hours so that 190 * retry is not always at the same time each day 191 */ 192 #define MAXRETRYTIME 82800 /* 23 hours */ 193 #define ASSERT_RETRYTIME 86400 /* retry time for ASSERT errors */ 194 195 /* This is the path that will be used for uuxqt command executions */ 196 #define PATH "PATH=/usr/bin " /* */ 197 198 /* This is the set of default commands that can be executed */ 199 /* if non is given for the system name in PERMISSIONS file */ 200 /* It is a colon separated list as in PERMISSIONS file */ 201 #define DEFAULTCMDS "rmail" /* standard default command list */ 202 203 /* define HZ to be the number of clock ticks per second */ 204 /* #define HZ 60 */ /* not needed for ATTSV or above */ 205 206 /* 207 * put in local uucp name of this machine if there is no "/etc/whoami" 208 * and no uname() (this is a last resort) 209 */ 210 #define MYNAME "kilroy" /* */ 211 212 /* define NOSTRANGERS if you want to reject calls from systems which 213 * are not in your Systems file. If defined, NOSTRANGERS should be the name 214 * of the program to execute when such a system dials in. The argument 215 * to said program will be the name of said system. Typically this is a shell 216 * procedure that sends mail to the uucp administrator informing them of an 217 * attempt to communicate by an unknown system. 218 * NOTE - if this is defined, it can be overridden by the administrator 219 * by making the command non-executable. (It can be turned on and off 220 * by changing the mode of the command.) 221 */ 222 #define NOSTRANGERS "/usr/lib/uucp/remote.unknown" /* */ 223 224 /* define LIMITS to be the name of a file which contains information 225 * about the number of simultaneous uucicos,uuxqts, and uuscheds 226 * that are allowed to run. If it is not defined, then there may be 227 * "many" uucicos, uuxqts, and uuscheds running. 228 */ 229 #define LIMITS "/etc/uucp/Limits" /* */ 230 231 /* define USRSPOOLLOCKS if you like your lock files in /var/spool/locks 232 * be sure other programs such as 'cu' and 'ct' know about this 233 * 234 * WARNING: if you do not define USRSPOOLLOCKS, then $LOCK in 235 * uudemon.cleanup must be changed. 236 */ 237 #define USRSPOOLLOCKS /* define to use /var/spool/locks for LCK files */ 238 239 /* define PKSPEEDUP if you want to try the recommended speedup in pkcget. 240 * this entails sleeping between reads at low baud rates. 241 */ 242 #define PKSPEEDUP /* */ 243 244 #endif /* !_PARMS_H */